How do you run an electric pallet jack?

As a common storage equipment, electric pallet trucks often appear in various industries. It is also very simple and convenient to operate. Here are some common operating steps and precautions:
The first is the preliminary inspection. Before operation, you need to check the vehicle in all directions to check whether the battery is sufficient and whether there are any abnormalities in the connection; check whether the body and fork appearance are damaged; confirm that the wheels are in good condition; test the sensitivity of the braking system; check whether the control device and signal device function normally to ensure that the vehicle has no hidden faults.

After doing a good job of preliminary inspection, you can start the vehicle: insert the key to turn on the power, wait for the vehicle self-inspection to complete, and after there is no fault prompt, adjust the seat position according to your own needs, and fasten the seat belt if there is one, and prepare for subsequent operations.

Common operating steps:
Fork operation: first lift the lifting handle to raise the fork to the appropriate height, align it with the pallet fork mouth and insert it. After ensuring that it is fully inserted, press the handle down to place the goods on the fork stably, and ensure that the goods are evenly distributed and the center of gravity is close to the vehicle.
Driving and handling: Hold the direction control handle to control the driving direction and speed, push the handle forward, pull the handle backward, slow down when turning, pay attention to the surrounding environment during driving, avoid obstacles and pedestrians in time to ensure transportation safety.
Parking and unloading: Park smoothly after arriving at the unloading point, pull the handbrake to fix the vehicle, lift the handle to lift the goods and pull out the fork, back the vehicle off the pallet, lower the fork, turn off the power and pull out the key.
Vehicle return: Park the vehicle in the designated area, put it neatly, clean up the debris on the vehicle to keep it clean, perform regular maintenance and extend the service life of the vehicle.

How much can an electric pallet jack lift?

The lifting weight of electric forklifts varies depending on the brand and model. Generally speaking, the load capacity of common electric pallet trucks is about 150 kg to 400 kg, the load capacity of ordinary electric forklifts is usually 1-3 tons, and some heavy-duty electric forklifts can reach a maximum load capacity of 5 tons or even higher.
The maximum load capacity that FLIFT can currently achieve is 20 tons. It is suitable for industries such as steel, port logistics, mining, large-scale machinery manufacturing, and building materials. In the steel industry, it is used to transport billets and steel; port logistics can handle short-distance transportation of containers and large equipment; the mining industry is responsible for the transportation of materials such as ores; large machinery manufacturing companies transport heavy parts; and the building materials industry is used to transport raw materials and finished products, helping these industries to efficiently complete the transportation of heavy goods, reduce labor costs, and improve production and logistics efficiency.

What types of electric transporters do you have?

According to the driving method, it can be divided into standing and walking.

According to the scope of application, we have ordinary electric pallet truck, cable drum electric pallet jack, paper roll truck, and platform rider truck.

According to the material, it can be divided into ordinary transporters and stainless steel transporters.
FLIFT provides various types and styles of electric transporters to provide better solutions for your handling work.

What customization options do you have?

We provide customization of fork length, battery type, and battery capacity. You can also add accessories, such as soft bag clamps. You can also add electronic scales, semi-enclosed backrests, etc.

What are the advantages of FLIFT brand electric pallet truck?

In terms of configuration, FLIFT electric transporters perform well. It uses American Curtis electronic control, which integrates advanced microprocessors, can accurately control speed and achieve efficient energy management, and can adapt to load changes under different working conditions. Technicians can also customize power curves through internal programmers to optimize acceleration and braking effects. At the same time, the vehicle is equipped with a regenerative braking system, which can convert the vehicle’s kinetic energy into electrical energy for recycling. It not only saves energy and reduces emissions, reduces energy consumption costs, but also provides additional braking force when the vehicle decelerates or brakes, improves driving safety, reduces tire wear, and extends tire service life. In addition, the vehicle is equipped with a variety of protective devices to escort the safety of vehicle operation and operators from every detail, and ensure the safety of the operation process in all aspects.

In terms of product diversity, FLIFT electric transporters are of various types, which can fully meet the different needs of various customers. Whether there are special requirements for the lifting height, requiring a higher or lower fork lifting height to adapt to specific shelves or loading and unloading scenarios; or there is a preference for battery type, such as the high energy density and long cycle life of lithium-ion batteries, or the low cost and high reliability of lead-acid batteries; or other special needs, FLIFT can provide customized options to create electric transporters that best fit the actual usage scenarios for customers.

Behind the FLIFT brand, there is a professional team as a solid support. During the product development and design stage, the professional technical team uses cutting-edge technology and rich experience to carefully carve each product to ensure its excellent performance and reliable quality. The production team strictly controls the production links, follows high-standard production processes, pays attention to details and craftsmanship, and is committed to creating high-quality electric transporters. The after-sales team is also professional and efficient. If the customer encounters any problems during the use of the product, the after-sales team can respond quickly, provide technical support and maintenance services in a timely manner, ensure the normal use of the customer, solve the customer’s worries, and check for the customer at every link, so that customers can feel at ease when buying and using.